For enquiries/ questions contact us atinfo@varnapestcontrol.in
Varna Suraksha ZX 20
Master Console in Metal + 20
Transducers
Protects Enclosed Area of approx. 6000 Sq. Ft. in a plain area.
Each Transducer covers 300 Sq Ft. in normal floor, 150 Sq Ft in False ceiling and flooring
276 Meters of cables supplied
Stand & Bracket to mount the controller
Model Specification:
Power Supply
230V AC Mains Outlet and 50 HZ frequency
Drives Upto
20 Transducers
Coverage Area:
Approx. 6000 Sq ft. (Plain Area)
Each Extra Tranducers Covers:
300 Sq Ft. in Normal Floor, 150 Sq Ft. in False Ceiling or Flooring.
Power Output
800 mW
Operating Frequency
Above 20 KHz
Sound Output
80 - 110 dB (Not Audible to Humans)
Weight
2415 Grams
Size
Size: 240 x 130 x 110 mm (approx.)
Power Output
800 mW
Power Consumption
20 Watts
Each Transducer Weight
40 Grams
Varna Suraksha ZX is an high end model with high frequency random signal generator which drives upto 20 transducers.
The signal is fed to each transducers (upto 20 transducers) from the main Master Unit. These signals are converted as high frequency sound waves that are audible to rats and very painful for them tolerate. The rats usually leave the protected area within 2 – 3 weeks, but you can see the gradual decrease of rodent infestation on installing the unit.
The transducers does not make any human audible noise, it is not harmful to human beings or pet animals at home.
How to Install This Unit -
Fix the Main Master Unit in an electrical room (proper ventilation is must) with provided brackets.
Plug the main unit into a Indian standard 220/230 VC wall outlet point.
Measure and cut required length of wire for each transducers from the Main Master Unit.
Connect the transducers to the master console socket provided behind. And fix the transducers to the wall or ceiling for every 300 sq ft areas. If false ceiling or underfloor, fix transducers every 150 Sq Ft. for better results.
Distance between each transducers should not be more than 20 feet.
It is ideal to mount the transducers on a wall 10 feet off the floor.
Transducers in the main floor or false ceiling should face a wall, it should not face open windows or doors. This will help to rebounce the waves for maximum effect.
Any Transducer wiring should be within the limit of 200 meters from the main unit.
Use bends and not elbows for smooth pulling of Transducer wires.
All the Transducers can be tested in an audible range by pressing Push button in the main unit when it is switched ON.
The red light (LED) will blink in the main Master Unit to indicate that the unit is working.
Leave the system ON 24 hours a day for continuous protection.
Within 2-3 weeks you can notice the reduction in rodent activity, if not, you will have to install additional units. (Please note: Usually, the type of structure, contents and partitions may limit the area of effectiveness, so please make sure to place the unit carefully.)
